Drok 0-48V PSU brackets for universal DIN bracket (vertical)

This is a bracket for vertically mounting a DROK power supply unit (PSU) onto metal universal DIN rail clips (27.45mm x 48.29mm). It has tight press-fit openings for the M3 nuts, and countersunk holes for the M4 screws. Threads will cut when you insert the screws.

Per bracket, you'll need:

• Two (2) M4x8 button head screws
• Two (2) M3x8 button head screws
• Two (2) M3 nuts

So if you're printing two brackets, well… just double the number of hardware needed. :)

I printed them flat for strength, 

My print settings:

• Rafts: No
• Supports: No (you could do touching buildplate for the nut cutouts, if you're paranoid)
• Resolution: 0.28 mm
• Infill:  20%
• Filament: PLA

If you're printing this for a hot location, consider a different filament type.