Paw Patrol Coin for Jet Command Blaster

This is a coin for the Paw Patrol Jet and Command Center. It is used in the jet portion as a “projectile,” meaning these go missing around the house quite a bit. Performance is on-par with the original coins.

There is one file for the complete coin, as well as a file for half the coin to be printed double and glued together (no bridging required for this one).

Photos shown are printed in Elegoo PLA at 210/65 with a .2 layer height. If the aesthetics are a little more important to you, I recommend a .12 layer height and to use the ½ coin file.

V2: Rounded outer edge more, evened out heights of protruding areas.