Rooted in the frame

I plan to create some models with the same “living-in-the-frame” concept and style.

This is the first one and i hope you like it.

Update 07/09/2023: Added repaired STL files for both depths

Update 25/8/2023: Added 6mm depth version, the original version is 2mm depth. The “deep” new model will take significantly more time to print and more filament.

Both STL models might show an error for "non-manifold edges”. To avoid these errors you can download and use 3MF files (from orca slicer).

For Model with 2mm depth

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA Overture Light Gray
• PLA+ Esun Bone White
• PLA+ Sunlu White

Swap Instructions:

• Start with Black
• At layer #5 (0.48mm) swap to Cement Gray
• At layer #8 (0.72mm) swap to Grey
• At layer #12 (1.04mm) swap to Light Gray
• At layer #16 (1.36mm) swap to Bone White
• At layer #18 (1.52mm) swap to White for the rest.

---------------------------------------------------------------------------------------

For Model with 6mm depth

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA Overture Light Gray
• PLA+ Esun Bone White
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #12 (1.04mm) swap to Charcoal Black
• At layer #16 (1.36mm) swap to Cement Gray
• At layer #20 (1.68mm) swap to Gray
• At layer #24 (2mm) swap to Light Gray
• At layer #38 (3.12mm) swap to Bone White
• At layer #42 (3.44mm) swap to White for the rest.

Enjoy my work? Support me by joining my club. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.