Brussels & Manila hanging signs

Print Settings

• Printer: Ender 3 Pro
• Material: Generic grey PLA
• Hotend Temp: 200°C
• Printbed Temp: 60°C
• Nozzle size: 0.4 mm 
• Supports: No supports needed if printed on its side
• Infill: 15%
• Layer Height: 0.2 mm
• Brim: No brim
• Print Software: Prusaslicer 2.5.2

Summary

This model was made because I have 2 clocks hanging both with the time of Brussels an Manila.

I included holes in the design for a small rope to go trough so you can hang them up.

The goal was just a simple design and for that I think this worked perfectly.

In the included pictures you can see the outcome.