Dyson v11, Outsize, v15 Battery/Vacuum Wall Dock

Originally designed to just be a spare battery dock but can be used as an additional dock for the vacuum as well. Part tested with ABS but should work printed in PETG. Recessed screws will be needed to ensure there is no interference with the battery or vacuum insertion. 

Print Settings:

• 4 walls/perimeters
• 30% infill
• No supports needed! Parts are already oriented correctly. 

Bill of Materials:

• 2x Heat Set Inserts (M3x5x4) (USA Option)
  • Heat insert tool (Optional)
  • Kit option (Includes tool and heat inserts)
• 2x M3 x 8mm SHCS Screws M3x10 should also work. 
• 2x Recessed screws for wall mounting