Endoscope Nozzle Camera Fixed Mount for Sovol SV06

A fixed mount for a ⌀8mm endoscopic camera.

This mount uses the boltholes for the stock nozzle cooling fan mount, so an alternative nozzle cooling setup is required.

The camera points at an angle straight to the nozzle and the cable does not interfere with the extruder wheel or stepper motor cable. The mount is fixed and uses the stock bolts, no extra parts are required. 

Since endoscope cameras tend to get quite hot when active for extended periods of time i'd recommend using a printing material with a higher glass temperature.

Video by Avel: