Makeshift Scavenger Pipe Dreads

This was a humorous lil idea i had for the flash hair contest. 

Materials:

• ¾ in garden hose
• Superglue
• Fishing line
• Cutting tool 

The premise is pretty simple. Its fitted for ¾ in garden pipe but can be scaled up using the scale tool and measure tool in Prusa Slicer. The length piece connects to the width edge through an indent made in the top and has adequate tolerances to be super glued. The size of the band can be adjusted by bending the incorporated springs to a smaller or larger diameter depending on what's needed.  I cut my garden hose to around 7 ½ in but I believe if someone recreates this build they should double the length of your head as that seems to be the best length (you can see my mistake because the hose doesn't fall down my head and just kinda stays on top). Once you found a size that's appropriate place a end cap and a start cap per hose.  The appropriate amount of hose too use is around 2 per hole. (which would be around 32 for all 16 holes)(you can actually see another mistake i made as there aren't enough to cover the back of my head.) Once you've scrounged around for all the pipe needed you need to tie the pipes with fishing line and allow slack so that the hoes can fall down. Do this for all the hose and your done.

If anyone wants to upgrade the project, make the garden hose clear and fill it with led. If you do it ill pay pal you 10 bucks.