A side drawer for Mk3 I3
Edit 2021-01-29: Add the file for the left drawer.
Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool)
Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name)
Edit 2021-02-07 : Add long version (files are prefix with long)
Edit 2021-02-10 : Add long version with SD card slot.
Edit 2021-02-14 : Update drawer V2 to V2-1 to fix the bug at the back of the v2 drawer. Thanks to Signals.cz.
Edit 2021-02-17 : Add Nozzle holder
Edit 2021-02-18 : Add 2 covers with PrusaSlicer and CapsuleCorp logo
Edit 2021-02-19 : Complete classic collection with 2 covers : Taurus and Nasa. Movis collection comming soon.
Edit 2021-02-20 : Add Phoenix cover
Edit 2021-02-21 : Add movie Collection cover
Edit 2024-02-10 : Add Star Wars long covers 3mf Files
A side drawer to store your small equipment (pliers, SD card, glue stick, hexagonal key, cutter, ...)
There are two drawers, one with a solid bottom and the other in a honeycomb to keep away plastic.
You can put a cardboard (cereal box for exemple) box at the bottom of the honeycomb drawer to make a solid bottom.
If you already print the V1 version please read Udapte V2 below
Installation instructions (see picture)
1 - Stick in the glue
Glue the 4 feet
Option: glue the 2 small locking tabs
Glue the 2 M4 nuts
2- Keep cool
(this part is a bit complicated)
Put the nuts and their supports in the aluminum extrusion and make them 1/4 turn. (put them completely on the left. With pliers slide them to the right place)
Use Nut_helper_tool to keep the nut in place
Screw the box with 2 small m4 screws. CAUTION use short screws so as not to dress the aluminum extrusion). About 13mm (head + threading)
3- final
put the drawer in place
glue (or just put in place) the cover
V2 update
1- Reduction of the width of the box (near vertical axis motor).
If you have already printed the V1, you will have to sand it about 1 mm)
2- modification of the location of the screws for easier assembly.
Addon :
Sd card organizer:
https://www.prusaprinters.org/prints/53935-sd-card-organizer-for-prusa-mk3-side-drawer
The author marked this model as their own original creation.