Best printed with 3 perimeters (shells). Length ok for a smaller printer like a Prusa Mini - but can provide STL for a longer attachment if anyone wants.
Prints uprights without any supports. PETG best but PLA would work too. I've even printed this with a single wall with Vase Mode enabled which will print quickly and will work but won't be very robust!
I've printed at 0.3mm layer height on a Prusa MK3S and 0.25mm on Prusa Mini. Can print in the fastest draft mode - should be 2.5 to 3 hours. (Less than an hour in Vase Mode).
The author marked this model as their own original creation. Imported from Thingiverse.