Prusa Mini handle (Supportless)

Printed the handle in Hobby Lobby yellow PLA. Upped the infill quite a bit and printed with 4 perimeters. Great easy to print design!

Works great for my guitar pedal board. Easy print. 0.2, 15% infill, no supports, Core One +

Nice handle, thank you for the model!

Hi guys, newby here. I am trying to print this but it fails :/ . Anyone can tell what am i doing wrong here?

It works well! Printed very easily. Instead of the Z axis it made more sense to me on this side so I can hold it by both the Z axis and the base. Plus this way I don’t have to worry about wires snagging on it. (edited)

Works great, but has some sharp edges after printing.
Printed on a mk4, with Prusament PETG Clear

These came out great.

Awesome handle, works amazingly well. Secured with M5 12mm screws and 3030 series M5 t-nuts in seconds. Super sturdy. Printed in black PETG with 30% gyroid infill and extra perimeter walls (5). I also put a modifier with 100% infill around 10mm around where the screws contact the handle to make it really strong.

Thanks for the handle :)