Sword Mount

Mount for swords, size can be customized. 

Printing:

-Does not need supports, print all parts  on flat surfaces → Picture→PartsAlignment

-Print with at least 6 or more Perimeters, for more stability.

-I would recommend 50% Infill ore more.

-Print material recommenced PETG ore stronger material. Print with the highest material temperature recommended, helps with bonding the layers more together hence more stability

Assembly:

See Picture → AssemblyGuidePicture

-To protect the wall you can make dampers and clue them in the socket shown in the Assembly Guide

-For my Mount. I only installed it on 1. Hole Because my wall is strong, you can however use all 3 holes iv you like, but you can't then rotate the mount easily. For The Screw, i used a 5mm Diameter with 50mm length. that should be quit enough.

-For your Mount, when you got no experience, just ask in a craftsman shop/store, tell them which wight and Wall Material you want to mount the sword on and which screw and dowel you should use.

This Work is inspired by the User:  Arkham Forge and his Sword-wall-mount:

https://www.printables.com/model/18736-universal-sword-wall-mount