IKEA mirror bracket

I made it because my brackets broke and I needed quick fix to hold the mirror. Turns out it works better than the original ones so i decided to publish them and maybe help other people.

I recommend PETG because I had them mounted near a radiator and that is what I printed them out of. Feel free to use PLA or any other material.

Print settings(optional):

Temp: 245 hotend, 70 bed;

Speed: 70-80 mm/s;

I would suggest 4-5 wall and top/bottom lines and 50% infill for strength but again, feel free to experiment.

Happy printing!