Ho Short Coupler

This is A shortcoupler for Ho scale model trains with a Nempocket. This design works with Marklin and Roco shortcouplers of a similar type and hook and loop couplers.

Print Settings

Printer:

Moon Moon MK2

Rafts:

No

Supports:

Yes

Resolution:

0.1mm

Filament: real filament PLA nuclear green

Notes:

This design is only tested with a nozzle of 0.25mm

step 1: Clean the edges

step 2: Clean the coupler holes on the main body

step 3: Put the lip on the coupler from the side of the nemshaft, it can be lightly compressed to allow the notches to snap in place