Prusa LACK Enclosure Cable Passthrough

Thanks

Printed with 0.3mm draft profile

it fit all cable! I like it!

LCD Cable passthrough

Useful part - had some fun getting it off the bed intact (flange is very thin) but probably more down to my fat fingers than the model! :-)

Prints awsome thanks 😊

This worked great. I had a smaller pass through when I first built my LACK enclosure but needed a large one now that I've decided to reposition my LCD to outside.

Perfect height for Lack table thickness :).
An annoying size for metric people.

7/8" is just over 22mm. If you resize the X axis to 91% you should be able to drill a 20mm hole.

It easily passes USB plugs at 100% so I expect at 91% you should still be fine :)