Creality K1 Filament Sensor mod

This mod allows you to use a side spool holder or print directly from a filament dryer, even from the back or side of the printer.

There is no need to change the filament sensor cable or make any other mechanical changes.

You will need two M3x5 screws to mount the mod.

The screws on the filament sensor can be used directly on the mod.

To print I used 20% infill, but this is your own choice.

I hope it helps those people who have no space in the back for the filament or for the dryer.

if you print it, please upload the make  :)