Beer Mug - Chmielaki 2023

More photos:
https://www.instagram.com/p/CvFZJU3t890/
https://www.instagram.com/p/CvHzweLt9WT/

With stainless steel inserts:
https://www.instagram.com/p/CvM5YA8NORH/

Printing timelapse:
https://www.instagram.com/p/CvHCn-POASK/

Render + texture settings
https://www.instagram.com/p/Cu1KyGstNGc/

---

More Beer Mugs
https://www.printables.com/@C47_3d/collections/758477

---

It was made to be used on festival to drink beer sold in 0,5l plastic cups - mug printed in 120% size. 
Easier to use than a cup and safer to use than drinking from a print
Buy a beer, put plastic cup in the mug, drink, throw out plastic cup, buy another beer ;)
You can also use it with bottled beer (100% size), beer can (94%) or just for a decoration
One photo is with 0.5l stainless steel inserts. Mugs were printed in 116% size then

Fits standard diameter beer bottle (there is a 72mm hole)
You can resize the model in slicer for different diameters
Use the equation:
X / 72 * 100%
where X stands for the diameter you want with added 1-2mm (for a 'safe distance')
So for example for a beer can (66mm, so X will be 68) you need 94,5% size
Remember to check the widest area (like the bottom of the bottle or top of the cup under the rim)

Mug is with two coat of arms versions
'sticking out' (1convex) and 'carved in' (2concave) - see one of the renders

Additionally there is a V1.1 version with more clean wood texture and some small changes

---

Printed on Voron 0.1 with Wood PLA from Sunlu and Stone Age Dark PLA from Spectrum Filaments
and on JG Maker A1 with Metallic Emerald magicPLA 3D Jake

Models made in Blender 3D
The city coat of arms is from 2022 version with small changes
Barrel texture is made with nodes. See my Instagram post (link above, render) for my settings in Blender 3D to generate such texture

---

Printed with 0.4 and 0.6mm nozzles
0.2-0.3mm layer height
2 walls (perimeters)
10% gyroid infill (you can try less)
5 top and bottom layers
No supports

On 120% size it is around 190g of filament used (so more than 2022 version, because of the design)

Z-seam set to 'user specified' and set to center so the seam will be on the right side, mostly hidden by hadle

---

Update 04 VIII 2023
Added V1.1 version with more clean wood and some small changes
Shorten file names

---