Pretty Bambu Accessory Control Box

This is a new enclosure for original Bambulab Smart Accessory Control Box project, so all credit to WolfWithSword for the work to actually figure all this out!

It has a locking power connector, embedded magnets, and flush mount barrel jacks.

You can find a more detailed breakdown of the changes and BOM on my site.

https://alitz.us/bambu-lab-3d-printer-accessory-control-box/

BOM

GX16-2P Connector
Quantity: 1
Link: https://www.amazon.com/dp/B07V54SPKQ

5.5x2.1 Barrel Connectors
Quantity: 4
Link: https://www.amazon.com/dp/B0B66T1QJZ

DC to DCBuck Converter
Quantity: 1
Link: https://www.amazon.com/dp/B00LTSC564

24v DC Power Supply
Quantity: 1
Link: https://www.amazon.com/dp/B088897J2D

4 Channel MOSFET Board
Quantity: 1
Link: https://www.amazon.com/dp/B07QGXY7F3

ESP866 D1-Mini
Quanatiy: 1
Link: https://www.amazon.com/dp/B09SPYY61L

6x3mm Magnets
Quantity: 25
Link: https://www.amazon.com/dp/B07KZQGWNN

M3x4x5mm Heat Set Inserts
Quantity: 10
Link: https://www.amazon.com/dp/B0BTYF2MMD

90 Degree Header Pins
Quantity: 6
Link: https://www.amazon.com/dp/B010ESD338

M3x4mm Cap Head Metric Screws
Quantity: 10
Link: https://www.amazon.com/dp/B0BRWCFD6Q

Other Supplies

Dual Wall Heat Shrink
Link: https://www.amazon.com/dp/B07DFG8QB7

20awg Silicone Wire
https://www.amazon.com/dp/B08CC1DLQF