Sim Knobs 45x23mm for CTS288 rotaries

For use with CTS 288 Rotary knobs with and without button press.

The Rotary knobs with button press are MUCH more durable than those without.

The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm throw. So the same hole size works for both.

Brake Bias
ABS
Traction Control

Included full Fusion 360, STL, gcode for Prusa and Prusa Slicer project files. Have fun!

Warning: Will require some X-acto knife clean up for strings on the letters.

Print instructions

Category: Toys & Games Summary

For use with CTS 288 Rotary knobs with and without button press.

The Rotary knobs with button press are MUCH more durable than those without.

The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm throw. So the same hole size works for both.

Brake Bias
ABS
Traction Control

Included full Fusion 360, STL, gcode for Prusa and Prusa Slicer project files. Have fun!

Warning: Will require some X-acto knife clean up for strings on the letters.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

</div>Rafts:

No

Supports:

No

</div>Resolution:

0.07 - 0.15

Infill:

15%

</div>
Filament:
Prusament PLA Pearl Red, Opal Green, White

Notes:

Multi-color prints with white as the second color.

My print started at 0.15mm thickness, but I made sure that it was only 0.07 for the top flat layers before the lettering.

I thoroughly purged the dark base filament with white before letting it print the letters.