Bambu Lab TPU Anti Vibration Feet Mounts

These are intermediate mounts made from TPU for Bambu Lab Anti Vibration feet. (You can do what you want but suggest TPU 95). They fit snug into the “well” of the original stock rubber feet that the anti-vibration feet substitute. It fits snug into the anti-vibration feet. One is simple, fits into well, and has a “neck” that fits down into the hollow center of the anti-vibration feet. The second, my favorite, puts the printer up just a tad, but fits the first 5mm bump, and the chamfered cut in that will HOLD the anti-vibration feet.. You will love both, both work great, and I have upped a 3rd design that puts ribs/barbs on the center column that goes into the center of the anti-vibration feet.. for her pleasure.. to create more of a “friction fit” than was already the case. Let me know what you think.

EDIT: V3 is up and I put lil barbs on the center column, not that they are needed, and the bigger mount, its not giving your anti-vibration foot up! Give me a shout if you download it, like to see your makes!

V2 has a taller base than V1. All work, its just what you want. Enjoy!

There are 3 sets of files, one with the Bambu logo, one without, and 3 sets w slight variations.  Print that side down, and allow supports.

These are my settings:

3 wall loops 

3 bottom layer

4 top layer

15% infil layer (Grid)

You can do what you would like, I won't be made at you, I promise! :D

Enjoy this, this has been on my mind since I purchased them a month ago, finally made time to do the deed. ENJOY! And if you like it, give me some heart love!

This is free to use, just don't want someone making money off of it.. not my intent, want you all to be able to use them, not fueling the D-bags who steal IP for profit. I wish there could be a “share/print freely no commercial” option. Anyway, had to put it in there so I thought I would speak on it. 

Enjoy gang!