Tree with moss for wall

I still have some moss lying around from another project and got some inspiration from the WWW. The result now beautifies my wall :-)

The tree has a width of about 40 cm (15.75 in), a height of about 27 cm (6.5 in) and a depth of 9 mm (0.35 in).
Divided into 3 parts so you can print it yourself. Clipping together with printed connectors (6 pieces are needed).

The objects in the STL files are already properly aligned and should fit on the most common printers.

Post-Printing

• The connector holds the 3D printed object together pretty well. But with the added weight from the moss, I recommend using super glue to secure the connectors.
• I do not know if it is necessary: I roughened the area for the glue with sandpaper (and cleaned it from dust).
• works really well with a glue gun
• 2 nails in the wall are fine; distance: 19 cm / 7.5 in