Creality Ender 5 Plus Saves about 15 minutes of 3D printing time on every print for me

Creality Ender 5 Plus Saves about 15 minutes of 3D printing time on every print for me...

Cool down Heat Bed Quicker. Normally it can take about half an hour to cool the Build Plate down to a temperature, 32°, I want before removing a part. This is a quarter of an hour quicker 2x 140mm x 20mm fans. Phanteks 140mm Case Fans PH-F140SP 12V 3-Pin Black/White. Connected in parallel I redesigned these fan brackets to have 3mm shorter edges so this is above the control box if the printer bed is lowered to max 400mm I've also made them stronger, in this design

Creality Ender 5 Plus Cool down Heat Bed quicker Part 1

Updated video, stronger in this STL file