Toyota BT levio 1/10th scale electric pallet jack

This is a scale model pallet jack, it is based on the toyota BT levio electric pallet truck.

Parts list:

• 1,75 mm filament
• screw: M3 X 6
• super glue

If some of the holes don't fit the 1,75 mm filament you should drill them out with a power drill (2mm).

Fuctions:

• It is able to steer
• It has functional wheels
• lifting mechanism (push on the steering shaft while pulling up the base)

maybe a beter lifting mechanism in the future!?

I strongly suggest you print it the way I did, i included foto's so you can use the exact same settings.

(you could use some white paint to make the letters pop, like I did)

Beware: upgrade available! ==> https://www.printables.com/model/534070-bt-levio-110th-scale-electric-pallet-jack-upgrade