Rear shelf for Pixhawk

Rear shelf for Volantex Ranger 1600/2000.
Accommodates Pixhawk in the "tub", with 2mm space on each side and bottom for some vibration dampening material.
Rear opening is for servo cables and 2 cut-outs are for straps.
Bellow the tub is space for ESC secured with strap.
In front is space for receiver (X8R in my case) secured with strap.
The "T" cut-outs are for wing clips.
Use original screws you get with the plane.
Once you get everything in it's not easy to get out or access, so plan ahead :)
Idea behind this design is to open up space in front for large LiPo (wip) and move the sensitive stuff in the middle of the plane.

Print instructions

Category: R/C Vehicles Summary

Rear shelf for Volantex Ranger 1600/2000.
Accommodates Pixhawk in the "tub", with 2mm space on each side and bottom for some vibration dampening material.
Rear opening is for servo cables and 2 cutouts are for straps.
Bellow the thub is space for ESC secured with strap.
In front is space for receiver (X8R in my case) secured with strap.
The "T" cutouts are for wing clips.
Use original screws you get with the plane.
Once you get everything in it's not easy to get out or access, so plan ahead :)
Idea behind this design is to open up space in front for large LiPo (wip) and move the sensitive stuff in the middle of the plane.