WYPALL X60 Holder

This is a holder for x60 Wypall wipes.

It serves as a stylish way to store your wipes in your shop,lab or wherever you might need them.

You can certainly put the holder directly on any work surface but the included wall mount keeps it out of the way. The best part is you can lift it off the hook any time, take them where you need them and them hang it back on the wall when you're done.

Printing

For this print you will need

• 1 Bottom
• 1 Top
• 3 Sides
• 1 Front
• 1 Wall Hook if desired

None of the parts need supports and can be printed with th most basic settings.

Assembly

Assembly is simple, all you need is CA glue (super glue).

Start by assembling the Top to the Front. After that add the Sides to the TOP. You cant go wrong here, there is only one orientation possible. The gluing is easier if you have small clamps to hold the parts while the glue dries. After that just add the Bottom.