BardSongs DM Screen Accessories Organizer (Modular)

A Rugged Box for BardSongs DM Screen Accessories, features the modular design.

This box is to organize accessories incl. Initiative Trackers, Magnetic Turntable Trackers, and Magnetic Knobs. 

Default setup (as the banner) is 8 Slots Box + 8 Slots Lid + 2x Box Latch + Container_2x + Container_3x+ Container_3x_Knobs. To organize more things, you could print the box with more slots (8+), which will enable you to put more different containers in it.

It needs 6 M3x30 screws, 4x for the latch and 2x for the lid.

吟游之歌帷幕配件收纳盒，用于收纳先攻板、磁铁转盘和磁钉。

默认配置（题图）是 8 Slots Box + 8 Slots Lid + 2x Box Latch + Container_2x + Container_3x+ Container_3x_Knobs，8 槽盒子内装 2 + 3 + 3  槽的三个容器。如果需要收纳更多内容，可以打印更多（8+）槽位的盒子本体，可以放不同类型的容器。

总共需要 6 颗 M3x30 螺丝，4 颗用于搭扣，2 颗用于盒盖转轴。

注意，此模型文件基于 CC BY-NC-SA 4.0 许可证开源，引用需署名、不得商用、修改后再分发需使用相同的本许可证。

Print Settings

• Infill Rate & Layer Height: doesn't matter, I went for 15% & 0.2mm for all parts. 
• Support: Free for all parts
• Notes: 
  • Confirm the part is in the right direction before printing, place it by yourself

打印参数

• 填充率 & 层高：不重要，我打印时是 15% 和 0.2mm
• 支撑：所有部件都无需增加支撑
• 注意：
  • 打印前确认打印件朝向正确，善用放平功能