Anbernic RG505 Grip

This model pairs well with the remixed stacked triggers for the RG505 on my page, it was inspired by a design I found but couldn't get the STL for, this was modelled in Blender, The model itself is alright and doesn't stand up on its own, but fits snugly for the RG505.

My Print settings:

• Nozzle: 0.6 mm
• Material: PLA
• Layer height: 0.2
• Supports: organic
• Infill: 15%
• Perimeters: 2
• Seam position: Rear
• Orientation: Grips on Bottom