Echo Dot 5 OWL Nest Bed Holder

This is a small stand for an Echo Dot 4th or 5th gen in the form of a small nest.

We wanted to mount the Echo Dot on the Bed for our daughter but not to be pushed off so fast. The Dot is not mounted in anyway but stands quite stable.

 The base can be colored to fit it as an owl nest if necessary. In my case white fits perfect.

The brackets are 2.2cm to fit soft pads in the inner side to not damage the bed.

Printed with PLA and split around 1mm above the nests bottom (see print file for prusa mini). Then glued together.