Eachine Racer 250 tx Antenna Bracket

Didn't have a good place to mount my tx antenna, so I made up this bracket real quick for my quadcopter. You'll have to cut the little supports inside with a razor blade. This should leave enough of a little edge to clip onto the holes. I printed vertically with minimal supports.

I also included 2 antenna versions for the 90 degree 2 double antenna look with normal holes and extended shafts

Just be sure to get the one you need

Also comment and I can change the size of the holes. I just somewhat guessed on the 2 antenna, because I knew they were generally thinner, but not sure what the diameter needs to be.