Lenovo 65w USB-C charger.

I bought a laptop that came with this usb-c charger from lenovo: https://www.amazon.com/Lenovo-4X20M26268-Included-Original-Packaging/dp/B06Y2YPWSM (Partnumber: 4X20M26268) and i was tired of wrapping the usb-c cable up in a ball so i did create this so i could wrap it around the charger insted.

It uses a cable tie to keep the top and the 2 half's together, and i had a velcro strap that had a loop in one end that i connected using the cable ties also. 

Since it was just used to hold the usb-c cable when travling and the charger did never get really hot i did print it with PLA.

As i dont have the charger anymore i only have the render i did of the one of the versions of the model before printing.

The left and right side is printet with the tab towards the bed and i am sure i did not use any support, and the top part is printet upside down, and do not need any support.