Sapphire Dragon HueForge Filament Painting

8 Color HueForge model of a “Sapphire” Dragon. Remixed from the remix of the Emerald Dragon. I resized to 200x200 and then re-colored.

DO NOT RESCALE IN Z

Print at 100% infill with a layer height of 0.07mm with a base layer of 0.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Dark Blue Transmission Distance: 0.5
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Silk Gold Transmission Distance: 4
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Black until layer #9 at 0.76mm
Dark Blue until layer #13 at 1.04mm
Azure Blue until layer #22 at 1.67mm
Aqua Blue until layer #26 at 1.95mm
Cotton White until layer #34 at 2.51mm
Savannah Yellow until layer #36 at 2.65mm
Gold until layer #42 at 3.07mm
Cotton White for the rest.

Use the exact layer heights in your slicer to get the correct result