Kasa HS300 Power Strip Mount remix center hole adjustment
Adjusted the center hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes.
15
182
2
623
updated
July 19, 2023
Description
PDFAdjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance.
3mf is setup for my Prusa Mini with 0.4mm nozzle at 0.25mm DRAFT layer height.
kasa_HS300_cord_end.stl the original STL with some modifiers:
- Organic supports
- 17mm cylinder as negative volume modifier at Object coordinates 0,0,0 (not World coordinates) to make hole in the center
kasa_HS300_end.stl is not modified and prints flat on bed.
Tags
Model origin
The user re-uploaded this model. The user is not the original author of the model.
