Kyle 🇬🇧

@KyleGB

Skirts with smol hexes to match the smaller machine. Added 2x Keystones to the rear skirt.

167

1179

updated August 10, 2023

S 16

shaxs

@shaxs_679505

I would also love to know if this would work for the BTT TFT 4.3. @KyleGB do you know or can a remix be made?

JendaDH

@JendaDH_534398

Hi,
adding this to my list of prints. Can you please advise what 4.3 touchscreen is suitable? Would the BTT TFT 4.3" work?
Thanks

W 6

William Sturgess

@WilliamSturg_1281309

What sort of Ethernet keystone works with these skirts?

Ga73

@Ga73_143653

Looks really good... Any news when you'll be releasing these for the standard 120 micron? 😊

Zen3Dlab

@Zen3Dlab_595597

build log: https://forum.zen3d.hu/d/59-m095-micron-g2z

A 8

Asiantuntia

@Asiantuntia_364142

My powersocket wont snap into position. The slots where it should snap on are not as open as the default skirts. Also the keystones dont fit.
edit: The keystones needed really much force to snap into position, but I cant use them because the motor wires are right next to them and cant fit cables. And I had to use the default skirt to get the powersocket to stay in place.
Side skirt with keystone would be nice. (edited)

Zura

@Zura

@Asiantuntia_364142 I'm having this problem as well. it appears that it pushes the tabs meant to lock it into place back into the receptacle. @KyleGB Any Chance you can make a fixed version? using AC inlet - Adam Tech IEC-GS-1-100 as the BOM suggests. Thanks!