Y.A.R.P.S (yet another raspberry pi stand)
Description
PDFUPDATED: 02/21/2019 - version 3 - with stand
STEP FILES INCLUDED! (please keep linking to source and remix if remixed!! i want to see what becomes of this group project) and please keep including your steps!
Added new version remixed 3.0 I recommend PETG .. stronger and more heat resistant.. but pla works fine
Removed some useless venting( tho it looked cool it wasted print time and the only ones needed were top row and heatsink punchout on the back)
added Pen Slot (by request)
Added more room on base for wires
Added Punch out Hole in top for misc wiring needs ( requested)
Added YARPS name :)
Added passive cooling vents from underside to between screen and board to allow for convection airflow plan (heat rises causing cold air to be drawn in from underside)
(a small fan can be placed underside to move air faster if desired. but with the vents in the back top and the heat-sinks and the convection slot in the bottom it naturally makes airflow now.. )
Print instructions
Category: Electronics Summary
UPDATED: 02/21/2019 - version 3 - with stand
STEP FILES INCLUDED! (please keep linking to source and remix if remixed!! i want to see what becomes of this group project) and please keep including your steps!
Added new version remixed 3.0 I recommend PETG .. stronger and more heat resistant.. but pla works fine
Removed some useless venting( tho it looked cool it wasted print time and the only ones needed were top row and heatsink punchout on the back)
added Pen Slot (by request)
Added more room on base for wires
Added Punch out Hole in top for misc wiring needs ( requested)
Added YARPS name :)
Added passive cooling vents from underside to between screen and board to allow for convection airflow plan (heat rises causing cold air to be drawn in from underside)
(a small fan can be placed underside to move air faster if desired. but with the vents in the back top and the heat-sinks and the convection slot in the bottom it naturally makes airflow now.. )
Print Settings
Printer:
p802ma
Rafts:
Doesn't Matter
</div>Supports:Doesn't Matter
Resolution:
.1
</div>Infill:15
Filament: Generic PETG red
Notes:
should print fine without supports but i prefer to use tree supports and get a nice clean bridge....
Post-PrintingUse tree supports for a cleaner print.. and full fan on bridges.. shouldnt really need supports if you can bridge well
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
