HexaPod Toolkit Box for Mk3S+

PARAMETRIC - Hexagonal Toolbox
IT UNROLLS Flat giving you access to all drawers and pods
Useful for specialised toolkits or toting around your DND mini's

STEP files included so you can add dividers to pods or specialise the pods to hold your printer nozzles and extra fans. etc..

Tolerance is set to 0.6mm (gap between parts) if you have a tighter tolerance machine you can reduce this setting in The step files for a much better fit. But it was left at 6 to ensure that most printers can use this.

there are Holes for a 4mm diameter 2mm thick circular magnet on every part ( 4 per pod 6 pods ) you will need 24 if you want to use them this is also parametrically changeable for any size circular magnet ( as long as its not deeper than the wall thickness)

the magnets are optional but will AID in keeping it Shut when toting around.

To mount the handle you will need to have 4 m4x8mm bolts and matching hex nuts.

Print instructions

Currently tolerance is at 0.6mm and wall thicknesses are 4mm

To mount the handle you will need to have 4 m4x8mm bolts and matching hex nuts.

Print 4 of the [POD_Body]
One [Pod_Last]

they should snap together in a chain and then snap to the main body ( if tolerances are too tight for your printer you may have to file a little off the grooved bits of the pod hinges for them to snap together and slide smoothly)

Print one [main body]
print 5 [pod_lid]
print one TPU handle
print one [DRAWER]