Direct Drive Artillery Hornet Cable housing and dust filter

intended to use with https://www.printables.com/model/516470

if you converted your hornet to directdrive, using my model or other, this mood helps you reuse the empty space if you still want to route the cable and filament from the original space, where there no longer is anything

part count and materials:
- filament dust filter name badge blank (0 to 1), optional, edit.to add your own coll name, or print the SuperHornet one.

       - cable guard spacer and solder cover (x 1)
Print:
       - cable guard box cover (x 1)
       -  filament dust filter rod clip (x 3)
       -  filament dust filter long rod  (x 1)
       -  filament dust filter long rod (x 2)
       -  filament dust filter name SuperHornet (0 to 1)
       -  cable guard box body (x 1)
       -  filament dust filter latch (x 1)
       -   cable guard box body (x 1)
       -  filament dust filter base (x 1)
       -  filament dust filter cover  (x 1)
       -  cable guard nut  (x 1)
Materials
Bolts: 4 x 1/8 bolts and nuts or M3
Conector 1x gx16-8 and drill the middle pin to 4mm
Bowden cable, recomended 3x4 to reduce drag, plus a small piece to insert on the filter cover bottom space, so it will be a friction stress relief 
Yellow sponge for the filter, cut to shape