Doodoo Dope Adjustable sights

So @Ex-Pigeons posted a really nice set of sights that look a lot like a pair that are commercially available, but they weren't adjustable. I had used the AWCY? Driplyft from EWW and Tdkin3d and knew that I could merge the two ideas to get a nice pair of adjustable sights. 

Behold, the Doodoo Dope adjustable sights!

Print the front and rear sights with the front face on the build plate (I used supports). Then print a peep and adjustment wheel (need supports for the wheel). You can use the adjustment wheel from the driplyft, but the one I made looks more like the DD sights.

Assemble front sight with M3x16 bolt through the bottom for elevation adjustment (hole in front of front sight for set screw if you want to use one) and M4x30 bolt and nut to mount to rail. Assemble rear sight with M3x20 bolt through the peep (it needs to thread into the peep to be able to adjust the windage) and into the adjustment wheel, and M4x30 bolt and nut to mount to rail.