Low Profile Record/Vinyl Shelves

Hey, thanks for checking this out. This is a simple record shelf I designed. There are two variations of this to print. The file with the suffix “_wider” has a somewhat deeper & wider trough for the record to fit into in order to increase the lean angle of the item. I personally am using the “normal” file on my own walls, as they were the first revision and so far, they are working. However, some of my thicker (say, 4-piece sets of 180g discs) have trouble fitting into these, so I made the revised version to aid with that. 

Please follow all guidelines for proper command strip install when mounting these. I would hate for your music to be damaged as a result from improper adhesion. 

I print these with 15% infill, with layer height L=.2mm. Minimal supports are needed, use your own judgement.