HueForge Black and White Iron Man with wings/DIY kid's wall art

This can either be a black and white wall hanging or you can print it out in black and white and allow your child to color it in. You'd then have a piece of art they created to hang on the wall. Add some magnets and it can also be hung on the refrigerator.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
White for the rest.