HueForge Superman

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Azure Blue Transmission Distance: 3
PLA Generic Gold Transmission Distance: 3
PLA PolyTerra Pastel Peach Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #5 at 0.48mm
Wine Red until layer #29 at 2.4mm
Azure Blue until layer #47 at 3.84mm
Gold until layer #51 at 4.16mm
Pastel Peach until layer #55 at 4.48mm
White for the rest.