Megacell Charger Battery Shim
Description
PDFThis is a shim to print and place under your batteries in the Megacell Charger ( Batch 1 and 2 ) ... it prevents 18650 cells from rocking and making bad contact due to the small temperature sensor that is located just under the cell.
No need to glue or tape into place... just drop into the slot and it should stay in place by itself.
Print instructions
Category: Parts Summary
This is a shim to print and place under your batteries in the Megacell Charger ( Batch 1 and 2 ) ... it prevents 18650 cells from rocking and making bad contact due to the small temperature sensor that is located just under the cell.
No need to glue or tape into place... just drop into the slot and it should stay in place by itself.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
</div>Rafts:No
Supports:
No
</div>Resolution:0.3
Infill:
20%
</div>Filament:
eSun PETG Grey
Notes:
You can use any material -- but I use PolyCarbonate or PETG. PLA/PLA+ works, but beware that at higher temperatures ( >60C ) it gets soft.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
