HueForge Iron Man with wings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Yellow Transmission Distance: 11
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
Wine Red until layer #13 at 1.12mm
Yellow until layer #29 at 2.4mm
White for the rest.