HueForge Deadpool arms crossed

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Polylite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Polylite White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
Wine Red until layer #10 at 0.88mm
Black until layer #11 at 0.96mm
Yellow until layer #17 at 1.44mm
Steel Grey until layer #22 at 1.84mm
White for the rest.