XYS3580 Power Supply Case

A case for the XYS3580. It supports Anderson PowerPole connectors out of the box. 
Rear fan design to help with venting any heat. 
It has room for a 24v switching power supply. 



I've included a F3D and STEP file for those who want to make their own mixes.

I had to install thermal pad on my regulator, somehow it didn't have any installed!



You will need:
12x M3 Screws. 12mm length.

4x M3 nuts

1x 40mm 5v fan, or 24v.**

1x XYS3580* (Amazon, Not affiliate link)

1x 24v power supply. (Amazon, Not affiliate link)

*- You can use any regulator that fits. Face opening is 39mm x 72mm. 

** - I split the fans to run on the regulator fan output. You might want a fan that matches the power supply voltage, so it always runs when on to help cool the power supply.

Print the following:
Front Plate x1
Back Plate x1
Case x1
Clamp x4

Inspired by: https://www.thingiverse.com/thing:6079222 and https://www.thingiverse.com/thing:4667645

I needed Anderson connectors, so I originally started to make only a back plate. 
Fast forward, and I made a whole dang case. 

I will expand on this project more to support additional connectors on the front, and add AC cable and switch to the rear. 

You can use the F3D and STEP files to make your own versions to support which connectors you need. 

Happy printing.