Watch Case Opener Box with Print-in-Place Lid

A watch case opener I purchased at Harbor Freight (see photos) does not come with a box, so I made one.

The case holds the opener, the instruction sheet, and the pin sets (with space for additional pin sets I plan to make).

Print Instructions

Print in PLA using the 3mf file provided; otherwise :

• 0.3mm layer height
• perimeters = 2
• 10% grid infill

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/8bb38d25ab7b68b0bccc10aa/w/dde10e306859eccbe69d6c12/e/be1692791753577819a0f198?renderMode=0&uiState=64b699c5ca851142db415a69