Giant minifigure toilet roll holder. These are about 8.33 times as large as normal minifigures.
Much the same in appearance as the source model I remixed from, but updated to improve construction and ease of assembly.
I also downloaded a source for the spanner here: https://grabcad.com/library/lego-wrench-1/files
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Filament:
Tinmorroy PLA
Notes:
All parts will print without supports. You might want a skirt on the spanner parts as they're tall and narrow.
How I Designed This ===================Changes from the source design
I recessed the eyes and mouth to a planar surface about 7mm deep and then created the printable features. These have been reduced very slightly (0.1mm) around the circumferences so will press-fit into the face securely.
The hands now lock into the arms so they won't pull out whilst a roll is fitted and don't need to be glued. They can still be fitted "out facing" or "in facing" to handle wider rolls.The legs now slot into the body with a stepped fitting which is easier to locate and glue.
I created a 2-piece spindle that connects into a replica lego spanner (US: wrench) that's been widened at the handle to reach both hands in the "out facing" position. This has a 24mm diameter and will also fit the original design.
The body keeps the original design's 60mm spaced wall fitting, same hand sizes, same head stud so should fit any other accessories or hats you have.
Arm bayonet
Recessed eyes and mouth with flat bases
Two piece spanner (US: wrench)
Leg/Body join and original 60mm wall fitting
Printed face pressed into place
Category: BathroomThe author remixed this model. Imported from Thingiverse.