HueForge swinging Spider-Man

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Dark Blue Transmission Distance: 0.5
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Polymaker Teal Transmission Distance: 0.5
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
Wine Red until layer #10 at 0.88mm
Dark Blue until layer #13 at 1.12mm
Azure Blue until layer #19 at 1.6mm
Polymaker Teal until layer #31 at 2.56mm
White for the rest.