HueForge Flamingo
A HueForge filament painting of a flamingo.
22
72
0
556
updated
July 17, 2023
Description
PDFFlamingo from photo found online.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Inland Black Transmission Distance: 0.3
PLA Polar Candy Red Transmission Distance: 4
PLA Inland Pink Transmission Distance: 5.5
PLA Inland White Transmission Distance: 5
Swap Instructions:
Black until layer #8 at 0.72mm
Red until layer #13 at 1.12mm
Pink until layer #16 at 1.36mm
White for the rest.
Model origin
The author marked this model as their own original creation.
