Fanatec CSL Pedal Leg

Support your Fanatec CSL Pedals if they hang off your racing stand! Designed for use with m8 x 110mm hex head bolt.
0m
2× print file
0.20 mm
0.40 mm
0.00 g
5
17
0
523
updated August 20, 2023

Description

PDF

If you have long legs like me, the only way you can get the correct foot position using the Fanatic CSL Pedals is to have them hang off your racing stand! This leaves just 2 m6 bolts holding the pedals on! Use these legs to support your pedals and drive like a pro!

 

Designed specifically for Best Buy Brand Racing Stand with Pedals on lowest elevation. Flat end of legs can be cut in PrusaSlicer to your required height.

 

Requires 1 m8 x 110mm hex head bolt and 1 m8 nut per leg. Washers are recommended, but not required.

 

Print at 0.20mm layer height at 60% gyroid infill with brim, no supports needed.

 

I used PETG, however, PLA should suffice.

Tags



Model origin

The author marked this model as their own original creation.

License