Lux 1 PowerSystem 20V Li-Ion battery holder for HSW

Battery holder for Lux 1 PowerSystem 20V batteries (2Ah and 4Ah was tested).

V1 is more for the 4Ah version, but V2 is more optimized and can be used for both the 2Ah and 4Ah versions with a smaller footprint and material cost. 

Both versions are using heat-set inserts (M3) and M3 HSCS screws (I use 8mm ones) 

FreeCad files are also provided for customization. 

Update: 
 for V2 I've added the option of a vertical and a horizontal alignment for the HSW holes. Turns out I was installing my wall 90 degrees clockwise, so be careful when designing / downloading parts :)