A couple of brackets I designed to mount a linear actuator to open and close a vent flap. Could be useful to someone!
On the motor mount needs supports, i used tree with no problems.
Printed in ABS, the motor mount is designed to use a long and short screw, the long screw fits through most of the length of the bracket which aids to rigidity.
The motor mount has an insert for an M6 nut for an M6 bolt to attach the actuator bracket
Theres a few shims included for that M6 bolt to reduce slop.
https://youtube.com/shorts/LhTJc2JVIE0
The author marked this model as their own original creation.